PLUMBING TOPICS A–Z
When gravity cannot do the whole job.
A sewage lift system pumps wastewater to a point where it can continue through the drainage system. It may serve a low-level fixture, a group of fixtures or a larger property.
The right arrangement depends on the waste being handled, the required flow and the height and distance the pump must overcome.

Match the system to the duty
A small fixture system and a whole-building lift station have different demands. Sewage, effluent and clear-water sump pumps are not automatically interchangeable. Pump selection should account for the system’s actual operating conditions.
Understand controls and alarms
Floats or other controls signal when pumping is needed. Some installations have multiple pumps and a high-water alarm, but the exact sequence varies by design. A check valve helps limit reverse flow where specified.
Treat a high-water alarm seriously
Reduce use of fixtures served by the system and arrange help. Do not open a sewage basin, bypass an alarm or work on wet electrical controls. Sewage and confined spaces bring hazards beyond an ordinary drain repair.
Maintain the complete installation
Controls, pumps, valves and the discharge route all need appropriate checks. A professional can follow the manufacturer’s service procedure and investigate repeated starts, abnormal noise or failures. Maintenance reduces risk but cannot guarantee that a backup will never occur.
ALLSTAR PLUMBING
Talk through the next step with Allstar.
Contact Allstar about sewer system service for a lift station concern and describe any alarms or changes in operation.




